ADAM EQUIPMENT BALANCE ACCESSORIES DENSITY DETERMINATION KIT AE401 WEIGHING INDICATOR GK WEIGHING INDICATOR STANDARD THERMAL PRINTER FOR BALANCES AND SCALES

Density Determination Kit

The density determination kit consists of apparatus which allows the user to weigh a sample in air and then weigh the same sample in water or other liquid with a known density.

The software in the balance takes the operator through the process and finally displays the resultant density on the LCD in g/cm3, compensating for temperature and for the use of alternative fluids when calculating the density of solids.

The density determination kit is compatible with the PW and PGW analytical balances.

There are 2 versions of the kit - one for the PW analytical balances and one for the PGW analytical balances. 

The kit consists of: Suspended weighing cradle to replace the standard pan Independent support for the beaker of fluid Glass beaker Thermometer with clip for suspension in the fluid Glass sinker of known volume for determination of fluid density

Density Determination Kit Price $375.00  

AE 401 Indicator

The AE401 stainless steel (grade 304) indicator meets IP65 standards for wash down, the connectors are not rated. With many features including a large back lit display, multiple weighing units, hold function and accumulation these indicators are ready for a variety of applications. With the adapter, rechargeable battery and wall mount bracket included there is nothing more needed.

Features Applications Hold function Weighing Quick and easy to configure through the keypad Full range tare Backlit LCD display Colour coded, sealed keypad Wall mount bracket Supports up to four 350 ohm load cells RS-232 uni-directional interface External calibration Auto power off Auto sleep / power down function to save battery life Rechargeable battery AC Adapter

General Specifications

Model AE401 Tare functions Full Interface RS-232 Uni-directional Operating temperature 32°F - 104°F Power supply 12VDC 800ma adaptor Display 7 digit LCD with backlight Housing Stainless Steel Overall dimensions (wxdxh) 9.4X5.7X3.7" / 240X145X95mm

Prices

Model AE401 List Price $260.00 AE401

GK Indicator

The GK offers an affordable indicator that is packed with smart features that will make weighing quick and easy. The built in Check weighing functions allows the user to easily view if there sample is above below or at set targets and with a full keypad counting applications are achieved with the same indicator making the GK totally flexible for numerous uses.

Features Applications 5 weighing units (kg, g, lb, oz, lbs:oz) Animal / dynamic weighing Automatic memory accumulation Check weighing Rechargeable battery Parts counting Pre-set counting with alarm Weighing Date and time Adjustable filters Full range tare Accumulation of Weight Wall mount bracket Check-weighing with low and high limits Check weighing LED bar graph Capacity tracker Large backlit LCD display Full colour coded keypad with numeric entry Simple user-friendly operation Splashproof to protect from accidental spills Easy access to the rechargeable battery RS-232 bi-directional interface External calibration Rechargeable battery up to 90 hours operation Auto sleep / power down function to save battery life AC Adapter

General Specifications

Model GK Tare functions FULL Interface Bi-directional RS-232 output Power supply 230VAC, 50/60Hz, 115v Optional Battery Internal Rechargeable Battery Display 6 digit LCB with backlight, 9LED bar Housing Indicator Housing ABS Plastic Overall dimensions (wxdxh) 9.9X4.3X6.7" / 252X110X170mm

Prices

Model GK List Price $225.00 GK

Standard Thermal Printer

 The Adam standard printer is a compact thermal printer which is ideally suited for use with the Adam range of laboratory balances.

This version records each individual weight value plus date and time on the AEA, AEP, AAA and AFP when enabled on the balance.

The printer is controlled direct from the balance and is supplied with an RS-232 connector which enables it to be linked directly to the AEA, AEP, AAA, AFP and ADG balances as well as the AMB moisture balances. As a general purpose printer it can be used with any RS-232 interface.

Used with the AEA and AAA analytical balances and the AEP and AFP top loading balances, the Adam printer will also record full calibration details in compliance with GLP requirements. When used with the AMB moisture balance, the printer will record the % loss in weight at each preselected interval, and at the conclusion of the test prints a record of the test parameters as well as time and date.

Specifications

Thermal printer 40 column dot matrix (80 column optional setting) Print roll: 112mm wide. Up to 20mm diameter Power supply: 8.5VDC-14VDC, 15 Watt Dimensions: 160mm x 130mm x 45mm Supplied complete with power supply adapter and RS-232 connector lead

Thermal Printer Price $395.00